Key takeaways
- Clean and dry the surface thoroughly before any sealer goes on.
- A penetrating sealer protects without changing the look, while a film-forming sealer adds sheen and color.
- Re-sealing is a matter of watching the surface, not marking a date on the calendar.
Why seal
Natural stone and pavers are porous. Rain, oils, leaves and de-icing salts can stain or weaken them over time. A sealer slows that down, makes cleaning easier and helps keep colors rich. It does not make a surface indestructible, and it is not a substitute for good drainage and a proper base.
Choose the right type
- Penetrating sealers soak in and leave a natural look.
- Enhancing sealers deepen color and make stone look wet.
- Film-forming sealers add a sheen and a protective layer on the surface.
Prepare properly
The surface must be clean, dry and free of efflorescence, oil and old coatings. Joints should be filled and stable. Sealing over dirt locks it in, and sealing damp stone can cloud it.
Apply in the right weather
Most sealers need a dry day with mild temperatures and no rain in the forecast. Apply evenly and avoid puddles. Let the surface cure before furniture and traffic return.
When to do it again
Sprinkle a little water on the surface. If it beads, the sealer is still working. If it soaks in quickly, it is time to plan a new coat. Sweeping, rinsing gently and wiping spills quickly will extend the life of any sealer.
Related services
Questions about your own project? Call or text (800) 207-0499, or use the form below.
